Open / Close Push Buttons
Model PBOC-10 is a compact push button control station normally located at the actuator,
however there are many applications requiring that the control be in a distant location.
It is available with momentary contact or mechanical interlocking switches to meet
the specific requirements of the application. This control package is supplied with
a NEMA Type 4 enclosure (additional enclosure types available) and is equipped with
lights for position indication. This control panel can be used in numerous applications
where on/off control is required.
Control Station - Open/Close with Selector Switches
Model SSOC-10 is a compact control station similar to model PBOC-10 except a selector
switch is applied instead of the push buttons used on model PBOC-10. This control
package can be located at the actuator or at a remote location of the actuator being
controlled. The enclosure is NEMA Type 4 (other enclosure types available) and is
equipped with indicating lights for position indication. This control panel is ideal
for applications requiring on/off control remote or local to the actuator.
Control Panel - 4-20mA Signal Transmitter
This control panel transmits a 4 to 20mA analog signal to provide proportional position
control of an actuator/valve for precise control of flow, pressure or temperature
in a variety of applications. This control package can be used in process control
or throttling applications.
Remote/Off/Local
This control package is available on all ICI electric actuators. It is normally
mounted on the actuator but can be mounted along side the actuator and hard wired
to the actuator. These controls panel are equipped with NEMA Type 4 enclosures as
standard (other enclosure types available). Standard equipment also includes open/close
light indication, Remote/Off/Local selector switch, mechanically interlocking open/close
push buttons (or selector type open/stop/close switch, shown in PDF) and well-marked
terminal strip for easy field commissioning.