---
title: Customer Reviews | Indelac Controls, Inc.
---

[![Exit](https://www.indelac.com/hubfs/img/ico-exit.svg)](https://www.indelac.com/company-overview/customer-reviews#)

![computer-destination](https://www.indelac.com/hs-fs/hubfs/computer-destination.png?width=137&height=130&name=computer-destination.png)

[![Build Your Own Actuator](https://no-cache.hubspot.com/cta/default/149978/e262451c-ad9b-4daa-9781-f8c9764cee04.png)](https://cta-redirect.hubspot.com/cta/redirect/149978/e262451c-ad9b-4daa-9781-f8c9764cee04)

# Actuator Customer Reviews

Customer Ratings allow you to share information on the product attributes you consider important and rate those attributes on a 5-star scale.

For example, in addition to providing an overall star rating for a product, you can rate and comment on individual features of that product - such as "Heavy Duty Gearing" on any Actuators.

Customer Ratings is currently a beta feature and is not yet available for every product.

## How to Submit a Review:

1. Fill in the form on the right and follow the steps.
2. Write or upload your review.  
    Note: To post a review, you must enter a title and type at least 20 words in the review.
3. Click Send review to submit.

## Past Reviews

**Indelac actuator has a significant advantage over these other actuators**

**Product: **R4BF03-2 & RXPBF03-2  
**Rating: **✰✰✰✰✰   
**Comment:**

TESTING CRITERIA

Each actuator was tested in two different scenarios. The first scenario was on the bench not connected to a valve. Each actuator was connected to an ON/OFF timing relay. The timing relay was set to open and close the actuator at a 75% duty cycle. For our case we used one minute open, three minutes closed.

The second scenario was testing each actuator on the system that we plan to use them on. The actuator would be turning a ¾” ball valve. The duty cycle for our system is closer to thirty seconds open, five minutes closed.

RESULTS

Each actuator was tested in both scenarios for three weeks a piece. Each actuator had no problems in each scenario. The current was measured in both scenarios and was a little higher when connected to the valve. Usually around 0.5 Amps when hooked to the valve and 0.48 Amps when not connected to a valve. The actuators have and excellent cycle time, 2.5 seconds. This is faster than the current actuators we use and we were very happy with their cycle time.

We are very pleased with these actuators, especially the actuator that is classified for hazardous areas. In the past the actuators that we have used for division one areas has been very bulky and slow. The Indelac actuator has a significant advantage over these other actuators not only in size but cycle time.

See *original review [here](https://www.indelac.com/company-overview/customer-reviews#).*

**Your Review Headline Here**

**Product: **R4BF03-2 & RXPBF03-2  
**Rating: **✰✰✰✰✰   
**Comment:**

## Looking for additional information?

- Find your resource

or [Talk to Us](https://www.indelac.com/lp-contact-us)