Rotary Electric Actuator
Electric Actuators

Safe & Secure Series: Electric Actuator with Internal Battery-Up System

INDELAC ACTUATORS LUBRICANT

The Safe & Secure Series is a compact cost effective solution for critical applications. With its own built in power supply the Safe & Secure Series couples the reliability of our American made electric actuators with the added security of a fail-safe battery back-up system. Not only this unit includes an internal battery pack, it is also field adjustable to fail closed, fail open or continue standard operations. Continue operation is available as long as the control signal is still being transmitted. The Safe & Secure Series leaves you in total control at all times during any sudden loss of utility power.

Related Links

SPECIFICATIONS

TORQUE:

400 Lb-In (45.19 Nm)

CYCLE TIME:
10 sec. / 90°

DUTY CYCLE:
75% (standard)

ENCLOSURE:
NEMA 4 (standard)
NEMA 7 (optional)

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator
Wired for light indication

SWITCHES:
SPDT snap action, 15 Amps @ 250 Vac

LUBRICATION:
Permanent

WEIGHT:
18 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching (optional)

Motors Electric

SNS4

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

Fail-Safe Product Line by Indelac Controls

SPECIFICATIONS

TORQUE:
675 Lb-In (76.26 Nm)

CYCLE TIME:

15 sec. / 90°

DUTY CYCLE:
75% (standard)

ENCLOSURE:
NEMA 4 (standard)
NEMA 7 (optional)

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator
Wired for light indication

SWITCHES:
SPDT snap action, 15 Amps @ 250 Vac

LUBRICATION:
Permanent

WEIGHT:
18 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching (optional)

Motors Electric

SNS6

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

Fail-Safe Product Line by Indelac Controls

SPECIFICATIONS

TORQUE:

1,000 Lb-In (112.98 Nm)

CYCLE TIME:

20 sec. / 90°

DUTY CYCLE:
75% (standard)

ENCLOSURE:
NEMA 4 (standard)
NEMA 7 (optional)

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator
Wired for light indication

SWITCHES:
SPDT snap action, 15 Amps @ 250 Vac

LUBRICATION:
Permanent

WEIGHT:
18 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching (optional)

Motors Electric

SNS10

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

Fail-Safe Product Line by Indelac Controls

SPECIFICATIONS

TORQUE:
1,500 Lb-In (169.48 Nm)

CYCLE TIME:

30 sec. / 90°

DUTY CYCLE:
75% (standard)

ENCLOSURE:
NEMA 4 (standard)
NEMA 7 (optional)

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator
Wired for light indication

SWITCHES:
SPDT snap action, 15 Amps @ 250 Vac

LUBRICATION:
Permanent

WEIGHT:
18 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching (optional)

Motors Electric

SNS15

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

Fail-Safe Product Line by Indelac Controls

SPECIFICATIONS

TORQUE:
2,000 Lb-In (225.97 Nm)

CYCLE TIME:

14 sec. / 90°

DUTY CYCLE:
75% (standard)

INPUT VOLTAGE:
24 Vac & Vdc, 12 Vdc 115 & 230 Vac available with extra enclosure

BATTERY:
12 Volt 2.9 AHr Rechargeable Sealed Lead Acid Battery Minimum 4 Years Life in Stand-By Use at 68°F

CHARGER:
Trickle charger drawing 1 to 1.3A during battery recharge and 50mA to maintain to full charge

ENCLOSURE:
NEMA 4 (standard), C, US certified by CSA
NEMA 7 (optional), C, US certified by CSA

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator

LUBRICATION:
Permanent

WEIGHT:
40 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching

Motors Electric

SNS20

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

SPECIFICATIONS

TORQUE:
2,800 Lb-In (316.56 Nm)

CYCLE TIME:

16 sec. / 90°

DUTY CYCLE:
75% (standard)

INPUT VOLTAGE:
24 Vac & Vdc, 12 Vdc 115 & 230 Vac available with extra enclosure

BATTERY:
12 Volt 2.9 AHr Rechargeable Sealed Lead Acid Battery Minimum 4 Years Life in Stand-By Use at 68°F

CHARGER:
Trickle charger drawing 1 to 1.3A during battery recharge and 50mA to maintain to full charge

ENCLOSURE:
NEMA 4 (standard), C, US certified by CSA
NEMA 7 (optional), C, US certified by CSA

COATING:
Thermally bonded polyester powder

POSITION IND.:
Visual indicator

LUBRICATION:
Permanent

WEIGHT:
40 Lbs

INSTALLATION:
Universal

TEMP. RANGE:
-40°F to 150°F
Heater & Thermostat required 0°F & below

OVERRIDE:
Manual, declutching

Motors Electric

SNS28

Enclosure options include: NEMA 4, 4X, 7 and 9. The heavy-duty sand-cast aluminum enclosure has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. Anodizing and epoxy coatings are offered as well.

NEMA 7 and 9 enclosures are perfect when the application requires equipment rated for Class I Groups C & D and Class II Groups E, F & G div. I and II environment. Despite a hostile environment, the Safe and Secure built in this explosion-proof enclosure can get the job done and lower the overall risk factor of the installation.

Safe & Secure Series is available in 115Vac, 230Vac, 12Vdc, 24Vdc, and 24Vac operating voltages to guarantee electrical compatibility and reliability with any process control around the world. It is equipped with 300 series stainless steel output shaft and heavy duty spur gear drive which, as in all ICI electric actuators, can withstand stall conditions without suffering gear failure.

Motors Electric Fail-Safe Control Panel

Actuated Valves

Motors Electric Fail-Safe Control Panel

Motors Electric

Actuator Company

Electric Actuators

Linear Actuator and Fluid Control Demo